Log in | Register
Categories
    Log In
    Forgot your password?
    Remember Me
    Don't have an account?

    RSS Series – Specifications






    Tower Warranty Information


    RSD warrants this product to be free of defects in material and/or workmanship to the extent, but only the extent, set forth below:

    (A) F.R.P. components for ten (10) years from date of installation. To be replaced or repaired as needed.
    (B) P.V.C. fill material for two (2) years from date of installation. To be replaced as needed. Maximum water temperature not to exceed °115f
    (C) All electrical, mechanical and non-F.R.P. structural components for one (1) year from date of installation. To be replaced or repaired as needed.

    The foregoing expressed warranty is in lieu of all other warranties, expressed, implied, or statutory (including, but not limited to, warranties of merchantability and fitness for any particular purpose.)

    RSD shall in no event be liable for any consequential, incidental or special damages and/or expenses.



    RSS Series Glossary



    Fan Blades

    All tower fans feature cast aluminum construction and provide a large volume of stable air at low noise levels. The fan pitch is adjustable in the field to optimize the performance and to account for variance in static pressure.


    FRP Construction

    All RSS towers feature FRP Fan Stack, Casing and Water Basins. The FRP panels are both corrosion and chemical resistant. The gelcoat finish includes UV inhibitors to protect the tower from the damaging effects of the sun.


    Inlet Louvers

    Our PVC inlet louvers are designed to allow maximum inlet air while limiting unwanted splash from the tower fill. The PVC material is UV protected and is resistant to both chemical and biological attack.


    Ladders and Safety Railing

    All RSS towers are equipped with OSHA standard ladders and safety railings to allow safe and easy access during inspection and maintenance. These are available in standard hot dipped galvanized or optional Stainless Steel.


    Motors

    All motors are UL recognized TEFC construction, and specially designed for our application. The motors are VFD rated, with frequency drive control panels available as a factory option.


    Support Structure

    The tower support structure and motor frame are constructed of shot dipped galvanized steel. Optional Stainless Steel components are available upon request.


    Tower Fill

    Our tower fill is constructed of thermoformed PVC to ensure uniform density across the entire deck. The PVC material is resistant to both chemical and biological attack. The sheets are UV protected and meet the CTI STD-136 for rigid PVC. (Limited to 115F continuous duty.) Premium fill with higher temperature ratings is also available upon request.


    Water Distribution System

    Water is distributed across the fill deck though a FRP distribution pan. The pan is easily accessible for inspection and service. There are no moving parts or spray nozzles which makes the system virtually maintenance free. FRP basin covers are provided to keep the tower clean.


    For more information about products or ordering call (800) 245-8007
    Or visit our contact page for more information.